Lower and Mid Reach
15-22 m Lifting Drill Rigs for Slope and Anchor Work
QCMG150, QCMG200, and QCMG220 are the natural source-based shortlist for projects described around 15, 20, and 22 m lifting heights.
A lifting-height label cannot define the complete machine. Send the actual hole coordinates, work angle, slope, setup area, mast and platform clearance, geology, tooling, production target, transport route, and power requirement.
Crawler slope drill with mast raised for mid-height work
/images/15-22m-lifting-drill-rig.jpg
Naming Range
15-22 m
Supplied product naming
Source Shortlist
150 / 200 / 220
Exact mapping to be released
Carrier
Crawler
Slope and ground review required
Hole Basis
Project-Specific
Geology, method, tooling, angle, air or flushing
Map the Drilling Coordinates
Provide a section or elevation showing machine setup, slope toe, bench, hole collar, hole angle and direction, reach, overhead clearance, side clearance, and safe access for operators and tooling.
- Setup point and elevation
- Hole collar coordinates
- Hole inclination and azimuth
- Mast and platform envelope
- Slope face and bench
- Operator and tool access
Check Transport Early
Transport dimensions, weight, disassembly, loading method, road permits, lifting points, container or RoRo feasibility, and site assembly should be reviewed before the commercial scope is frozen.
Reference Table
15-22 m Selection Matrix
This is a planning matrix. The exact model-to-height mapping and all technical values require the released data sheet.
| Source shortlist | Planning height label | Main data to close |
|---|---|---|
| QCMG150 | 15 m | Work geometry, hole, geology, electric option, transport |
| QCMG200 | 20 m | Reach, platform, mast, carrier, power, tooling |
| QCMG220 | 22 m | Reach, stability, setup, transport, hole method |
Frequently Asked Questions
Answers to common technical, documentation, inspection, and export questions.
Which data is needed before a firm quotation?
Send the work or lifting height, hole position, angle, diameter and depth, geology, drilling method, slope or roadway geometry, setup area, access, transport limits, power, tooling, production target, quantity, destination, and required documents.
Are website drilling ranges guaranteed in every ground?
No. Values reproduce supplied working tables for early screening. Actual range and productivity depend on geology, hole angle, drilling method, tooling, air or flushing, setup, operator, and exact configuration.
Can Zhongmei coordinate inspection?
Yes. The agreed scope can cover identity, dimensions, configuration, movements, controls, auxiliary systems, tools, documents, packing, and buyer or third-party inspection.
How are safety and compliance handled?
The machine configuration, destination rules, site risk assessment, operator procedure, guarding, access, stability, electrical or engine requirements, and exact certificates must be reviewed for the selected order and use.
Need a Quote for 15-22 m Drill Rigs?
Send the exact model if known, operating conditions, payload or capacity, quantity, destination, preferred trade term, and document requirements. We will reply with open technical questions and next steps.