High-Reach Slope Drilling
QCMG Crawler Slope and Anchor Drill Rigs
The supplied parameter sheet lists six QCMG model codes covering a lifting-height naming range from 15 to 35 m. It repeats a 300 mm drilling-diameter and 50 m depth reference.
These values support a shortlist. The released exact-model data sheet must close the work geometry, mast and platform, drilling head, tooling, air or flushing, chassis, stability, power, transport, and destination requirements.
Teal crawler slope drilling rig with its lifting structure fully visible in a supplier yard
/images/qcmg-slope-drill-rig-v2.jpg
Source Models
6
QCMG150 through QCMG350
Lifting Naming
15-35 m
Source product naming
Hole Reference
Ø300 mm
Repeated source-table value
Depth Reference
50 m
Repeated source-table value
Six Lifting Heights
Scroll the QCMG Model Range
The supplied files map six lifting-height names to six QCMG model codes. Select a range to continue the technical review.
Source height
01 / 06
15m
QCMG150
The compact end of the supplied lifting-height range.
Open 15-22 m rangeSource height
02 / 06
20m
QCMG200
A lower-mid reach reference for project screening.
Open 15-22 m rangeSource height
03 / 06
22m
QCMG220
The upper reference in the supplied lower and mid range.
Open 15-22 m rangeSource height
04 / 06
25m
QCMG250
The entry point to the supplied high-reach range.
Open 25-35 m rangeSource height
05 / 06
30m
QCMG300
An extended high-reach reference requiring transport review.
Open 25-35 m rangeSource height
06 / 06
35m
QCMG350
The highest lifting-height reference in the supplied files.
Open 25-35 m rangeUse the arrow buttons, trackpad, mouse wheel, or swipe. Exact reach, stability, drilling system, dimensions, weight, and transport scope remain model and project specific.
Separate Reach, Hole, and Carrier
Work or lifting height describes where the drilling system reaches. Hole depth describes penetration. Chassis and setup determine where the carrier can safely position. Specify all three, including angle, offset, slope, bench, clearance, and transport.
- Work height and hole coordinates
- Hole diameter, depth, angle, and method
- Geology and groundwater
- Slope and bench geometry
- Setup footprint and access
- Transport and lifting limits
Crawler slope drilling rig with elevated mast in the supplied field photography
/images/slope-drill-rig-field.jpg
Match Tooling and Auxiliary Systems
Define rotary, DTH, casing, anchor, or other method; drill head; rods and bits; compressor; flushing; dust or water handling; grouting interface; clamps; tool handling; spares; and local consumable availability.
Reference Table
QCMG Supplied Source References
Only endpoint dimensions and weights are shown where the source audit confirmed them. Request the released row for each intermediate model.
| Model | Chassis reference | Engine or power | Hole reference | Overall reference | Weight reference |
|---|---|---|---|---|---|
| QCMG150 | Approx. 3,500 × 2,500 mm | Up to 130 kW; optional 55 kW electric listed | Ø300 mm / 50 m | Approx. 12,500 × 2,500 × 3,200 mm | 18,000 kg |
| QCMG200 | Confirm released sheet | Up to 130 kW | Ø300 mm / 50 m | Confirm released sheet | Confirm released sheet |
| QCMG220 | Confirm released sheet | Up to 130 kW | Ø300 mm / 50 m | Confirm released sheet | Confirm released sheet |
| QCMG250 | Confirm released sheet | Up to 130 kW | Ø300 mm / 50 m | Confirm released sheet | Confirm released sheet |
| QCMG300 | Confirm released sheet | Up to 130 kW | Ø300 mm / 50 m | Confirm released sheet | Confirm released sheet |
| QCMG350 | Approx. 5,400 × 3,000 mm | Up to 130 kW | Ø300 mm / 50 m | Approx. 16,200 × 3,100 × 3,300 mm | 42,000 kg |
Frequently Asked Questions
Answers to common technical, documentation, inspection, and export questions.
Which data is needed before a firm quotation?
Send the work or lifting height, hole position, angle, diameter and depth, geology, drilling method, slope or roadway geometry, setup area, access, transport limits, power, tooling, production target, quantity, destination, and required documents.
Are website drilling ranges guaranteed in every ground?
No. Values reproduce supplied working tables for early screening. Actual range and productivity depend on geology, hole angle, drilling method, tooling, air or flushing, setup, operator, and exact configuration.
Can Zhongmei coordinate inspection?
Yes. The agreed scope can cover identity, dimensions, configuration, movements, controls, auxiliary systems, tools, documents, packing, and buyer or third-party inspection.
How are safety and compliance handled?
The machine configuration, destination rules, site risk assessment, operator procedure, guarding, access, stability, electrical or engine requirements, and exact certificates must be reviewed for the selected order and use.
Need a Quote for QCMG Drill Rigs?
Send the exact model if known, operating conditions, payload or capacity, quantity, destination, preferred trade term, and document requirements. We will reply with open technical questions and next steps.