High Reach
25-35 m High-Reach Slope and Anchor Drill Rigs
QCMG250, QCMG300, and QCMG350 are the source-based shortlist for 25, 30, and 35 m lifting-height project descriptions.
Higher reach affects carrier size, setup area, transport, mast and platform clearance, structural load, stability, wind operating limits, emergency procedure, and inspection. These items need an exact-model review.
Large teal crawler slope drill photographed with elevated drilling structure
/images/25-35m-lifting-drill-rig.jpg
Naming Range
25-35 m
Supplied product naming
Source Shortlist
250 / 300 / 350
Exact mapping to be released
Endpoint Weight
42,000 kg
QCMG350 source-table reference
Endpoint Length
≈16.2 m
QCMG350 source-table reference
Treat Setup and Stability as Design Inputs
Send bench width, slope and cross-slope, ground bearing, edge distance, allowable setup points, access road, wind conditions, overhead hazards, utilities, anchoring or leveling needs, and emergency recovery plan.
- Ground bearing and level
- Bench width and edge distance
- Wind and operating limits
- Carrier leveling and stability
- Mast or platform clearance
- Recovery and emergency access
Crawler slope drill photographed for carrier and setup review
/images/qcmg-slope-drill-rig.jpg
Plan Transport and Site Assembly
Large equipment may require route surveys, permits, partial disassembly, cranes, lifting frames, protected hydraulic and electrical connections, reassembly instructions, and recommissioning. Define what is included in the export scope.
Reference Table
25-35 m Selection Matrix
This planning matrix preserves the source naming. Exact dimensions, weights, reach diagrams, and operating limits require the released model sheet.
| Source shortlist | Planning height label | Main data to close |
|---|---|---|
| QCMG250 | 25 m | Reach, setup, hole, geology, power, transport |
| QCMG300 | 30 m | Mast and platform envelope, stability, tooling, transport |
| QCMG350 | 35 m | Approx. 42 t and 16.2 m endpoint references; full project review |
Frequently Asked Questions
Answers to common technical, documentation, inspection, and export questions.
Which data is needed before a firm quotation?
Send the work or lifting height, hole position, angle, diameter and depth, geology, drilling method, slope or roadway geometry, setup area, access, transport limits, power, tooling, production target, quantity, destination, and required documents.
Are website drilling ranges guaranteed in every ground?
No. Values reproduce supplied working tables for early screening. Actual range and productivity depend on geology, hole angle, drilling method, tooling, air or flushing, setup, operator, and exact configuration.
Can Zhongmei coordinate inspection?
Yes. The agreed scope can cover identity, dimensions, configuration, movements, controls, auxiliary systems, tools, documents, packing, and buyer or third-party inspection.
How are safety and compliance handled?
The machine configuration, destination rules, site risk assessment, operator procedure, guarding, access, stability, electrical or engine requirements, and exact certificates must be reviewed for the selected order and use.
Need a Quote for 25-35 m Drill Rigs?
Send the exact model if known, operating conditions, payload or capacity, quantity, destination, preferred trade term, and document requirements. We will reply with open technical questions and next steps.